Accessories

Use the robust, 350mm long Pitot tube with a diameter of 7mm for measuring flow velocity (in combination with a compatible measuring instrument/pro...

The Atten ST-1016 Solder Smoke Absorber is a Desktop-type Fume Extractor, that can be operated vertically or horizontally, and can remove soldering...

Measuring air flow velocities and correctly calculating the volume flow at ventilation outlets can present a challenge. Use the testovent 417 funne...

The HIKMICRO Thunder Eyepiece Scope is an accessory that allows you to upgrade your Thunder clip-on scope for use as a stand-alone thermal imaging ...

Securely attach your HIKMICRO Thunder Thermal Imaging Scope to the objective bell of your optical scope. The HIKMICRO HM-THUNDER-62A Thunder Scope ...

Securely attach your HIKMICRO Thunder Thermal Imaging Scope to the objective bell of your optical scope. The HIKMICRO HM-THUNDER-60A Thunder Scope ...

Securely attach your HIKMICRO Thunder Thermal Imaging Scope to the objective bell of your optical scope. The HIKMICRO HM-THUNDER-50A Thunder Scope ...

Securely attach your HIKMICRO Thunder Thermal Imaging Scope to the objective bell of your optical scope. The HIKMICRO HM-THUNDER-40A Thunder Scope ...

Securely attach your HIKMICRO Thunder Thermal Imaging Scope to the objective bell of your optical scope. The HIKMICRO HM-THUNDER-38A Thunder Scope ...

Chauvin Arnoux offers extensive, high-quality measuring accessories for its wide range of measuring instruments for earthing and earthing resistanc...

Chauvin Arnoux offers extensive, high-quality measuring accessories for its wide range of measuring instruments for earthing and earthing resistanc...

HIKMICRO Two-Piece Scope Rings set is used for mounting rifle scopes. The center height is 29mm with an inner diameter of 30mm.

The Mitutoyo 905338 SPC Connecting Cable is used to output measurement data from the digimatic gauge with the output feature to the digimatic mini ...

The Hikmicro HM-P201 thermography camera macro lens allows you to spot potential design flaws, evaluate PCB hot spots, and inspect small electronic...

The MR07 Hammer Probe expands the functionality of your FLIR Moisture Meter by allowing you to take measurements in the subfloor through the carpet...

Use the robust, 1000mm long Pitot tube with a diameter of 7mm for measuring flow velocity (in combination with a compatible measuring instrument/pr...

Use the robust, 500mm long Pitot tube with a diameter of 7mm for measuring flow velocity (in combination with a compatible measuring instrument/pro...

Tekneka type-K bead wire temperature probe is a thermocouple probe that uses a thin wire made of thermocouple alloy (Chromel-Alumel) to measure hig...

Tekneka type-K bead wire temperature probe is a thermocouple probe that uses a thin wire made of thermocouple alloy (Chromel-Alumel) to measure hig...

Carry your FLIR ONE Edge-Series thermal camera in this protective pouch to prevent it from damage when not in use. The pouch can be worn on your be...

The HM-THUNDER-R Rail is used for thermal image scope HM-TR13-35XF/CW-TH35C (used with HM-THUNDER-E), HM-TR13-25XF/W-TH25, and HM-TR13-35XF/W-TH35....

Tekneka A760-CF Calibration Foils are ideal for use in the laboratory, on the production line, or on-site. Calibration foils or ‘shims’ are the mos...

Tekneka A710-CF Calibration Foils are ideal for use in the laboratory, on the production line, or on-site. Calibration foils or ‘shims’ are the mos...

When used in conjunction with a set of foils, Tekneka Zero Test Plates are ideal to test a coating thickness gauge’s functionality and calibration,...